There are many kinds of power gold that are often used in the circuit process, and the wire clip is one of them. The types of cable clips have many uses and they are different. I don’t know if you have heard of the puncture wire clip. Its use is very large. The amount of use is very large, and it is very convenient to use, then what are the technical characteristics of the insulation piercing clamp?
A piercing cord clamps an insulating upper shell, an upper piercing blade arranged on the insulating upper shell, an insulating lower shell, and a lower piercing blade arranged on the insulating lower shell. And it is used for connecting the insulating upper shell A connecting screw with the insulating lower shell and two connecting screws for connecting the insulating upper shell and the insulating lower shell.
- The upper end of a connecting screw is provided with a torque nut assembly threadedly connected, and the upper end of the second connecting screw is provided with a two torque nut assembly threadedly connected.
Note: A torque nut assembly includes a torque nut, and a two torque nut assembly includes two torque nuts. The uncapping torque of one torque nut is greater than the uncapping torque of two torque nuts. - A torque nut assembly also includes a connecting nut located below a torque nut, a connecting nut and a torque nut are connected as a whole.
- The two-torque nut assembly also includes two connecting nuts located below the two-torque nut, the two connecting nuts and the two-torque nuts are connected as a whole.
According to requirements 1 or 2 or 3, the technical characteristics of the puncture clamp are:
- A gasket is also sleeved on a connecting screw between a torque nut assembly and the upper insulating shell.
- Two gaskets are also sleeved on the two connecting screws between the two torque nut assembly and the insulating upper shell.
- The upper piercing blade is inlaid on the insulating upper shell.
- The lower piercing blade is inlaid on the insulating lower shell.
- There is a one-to-one correspondence between the upper piercing blade and the lower piercing blade.
According to the cable connection construction method of the piercing clamp according to claim 1, its technical features include the following steps: - Put the insulated mainline and insulated branch line between the insulated upper shell and the insulated lower shell.
- When the temperature of the construction environment is higher than or equal to the set temperature T: Use a wrench to tighten the two-torque nut until the two-torque nut breaks and falls off.
- When the temperature of the construction environment is lower than the set temperature T: Use a wrench to tighten a torque nut until the torque nut breaks and falls off.