Special Fiber Optic Cable
Three types of special fiber optic cables are commonly found in power fiber optic cable systems:
Ground composite fiber optic cable (OPGW): Optical fiber is placed inside the steel-clad aluminum-stranded structure of the power line. The application of OPGW cable plays a dual function of ground and communication, effectively improving the utilization rate of power towers.
Winding fiber optic cable (GWWOP): In places where transmission lines already exist, this kind of fiber optic cable is wound or suspended on the ground line.
Self-supporting fiber optic cable (ADSS): With strong tensile capacity, it can be hung directly between two power towers, and its maximum span can be up to 1000m.
Special Fiber Optic Cable Types
Access Building Cable (ABCⅠ-Ⅱ)
The fibers, 250 μ m, are positioned in a loose tube of high-modulus plastic. The tubes are filled with a water-resistant filling compound. The tube is covered with a layer of glass yarn as a strength member. The cable is completed with an LSZH(LSZH, Low smoke, Zero halogen, Flame retardant)material Jacket.
Characteristics
Good mechanical and temperature performance
High-strength loose tube that is hydrolysis-resistant
Glass yam strength members ensure tensile strength
Crush resistance and flexibility
Standards
Comply with standard YD/T 1258.4-2005、ICEA-596、GR-409、IEC 332-1 and IEC 332-3C.
Transport/Storage/Operating Tempeature:-20°℃~+60°℃
Installation Temperature:-5C~+50℃
Unitube Mining Flame-retardant Cable (MGXTSV)
The fibers,250 μ m, are positioned in a loose tube made of a high-modulus plastic. The tubes are filled with a water-resistant filling compound. The tube is wrapped with a layer of PSP longitudinally. Between the PSP and the loose tube water-blocking material is applied to keep the cable compact and watertight. Two parallel steel wires are placed on the two sides of the steel tape. The cable is completed with a flame-retardant sheath. Application: Duct/Aerial/Direct buried.
Characteristics
Good mechanical and temperature performance
High-strength loose tube that is hydrolysis resistant
Special tube-filling compounds ensure the critical protection of fiber
Special sheath material ensures excellent flame-retardant performance
PSP enhancing moisture-proof
Two parallel steel wires ensure tensile strength
Small diameter, lightweight, and friendly installation
Long delivery length
Standards
Comply with Standard Q62170406-MG001-2011 as well as MT386-2011; and passes MA certification.
Unitube Non-metallic Non-armored Cable (GYFXY)
The fibers,250 μ m, are positioned in a loose tube made of a high-modulus plastic. The tubes are filled with a water-resistant filling compound. Over the tube,water-blocking material is applied to keep the cable watertight. Two parallel Fiber Reinforced Plastics(FRP) are placed on the two sides. The cable is completed with a polyethylene (PE) sheath.
Characteristics
Good mechanical and temperature performance
High-strength loose tube that is hydrolysis-resistant
Special tube-filling compounds ensure the critical protection of fiber
Two parallel FRPs ensure tensile strength
PE sheath protects cable from ultraviolet radiation
Small diameter, lightweight, and friendly installation
Long delivery length
Standards
Complies with standard YD/T 769-2010.
Storage/Operating Tempeature:-40°C to +70°C
Simplex Cable (GJFJV)
SXC simplex cable uses a single 900μm or 600 μm flame-retardant tight buffer fiber as an optical communication medium, the tight buffer fiber wrapped with a layer of aramid yam as strength member units, and the cable is completed with a PVC or LSZH (LOW smoke, Zero halogen, Flame-retardant)jacket.
Characteristics
Tight buffer fiber ease of stripping
Tight buffer fiber has excellent flame-retardant performance
Aramid yarn as a strength member makes cable have excellent tensile strength
The jacket is anti-corrosion,anti-water,anti-ultraviolet radiation, flame-retardant, harmless to the environment, etc.
Applications
Optical fiber jumper or pigtail
Indoor riser level and plenum level cable distribution
Interconnect between instruments, communication equipment
Standards
Comply with standard YD/T 1258.2-2003、ICEA-596、GR-409、IEC 60794-2-10/11, etc; and meet the requirements of UL approval for OFNR and OFNP.
Bow-Type Drop Cable for Duct (GJXFHA)
The optical fiber unit is positioned in the center. Two parallel Fiber Reinforced Plastics (FRP) are placed on the two sides. Then, the cable is completed with a black or color LSZH sheath.
Characteristics
Special Low-bend-sensitivity fiber provides high bandwidth and excellent communication transmission properties
Two parallel FRP/strength members ensure good performance of crush resistance to protect the fiber
Simple structure, lightweight, and high practicability
Novel flute design, easily strip, and splice, simplify the installation and maintenance
Low smoke, zero halogen, and flame retardant sheath
APL moisture barrier, PSP enhancing moisture-proof
Storage/Operating Tempeature:-20°C to +60°C
Cable Factory
ZMS Cable Factory has many years of experience in the production of fiber optic cables and has successfully cooperated with many countries around the world, examples include Egypt, Uganda, UAE, etc. Our fiber optic cable products have strict export qualification certificates and can be customized to multiple standards according to customer requirements.
If you don’t know how to choose the product you need or can’t find the cable type and size you need on this page, don’t worry. Contact us and send us your requirements, and we can help you choose the right cable. You can provide us with the following information: cable voltage, conductor material, insulation and sheath material, shield type, armor type, etc. or you can provide us with cable installation environment, application requirements, etc. We will serve you wholeheartedly. ZMS cable supplier has several quality certifications: ISO 9000, ISO 9001, ISO14000, ISO14001, ISO18000, CE, IEC, BS, NFC, ASTM, DIN, etc.
ZMS Cable Company Service
Over Productions Service: ZMS has a wide range of cable and conductor products for you to choose from. We will provide caring services and professional project solutions for everyone who needs them.
Quality Certification Services: ZMS cable products are manufactured according to GB, IEC, BS, NFC, ASTM, DIN, and other international standards. Our technical team can customize cable products that meet your requirements according to your needs.
Profession Customer Service: ZMS provides free professional consulting services to provide you with one-stop project solution services and rapid product delivery solutions.
Delivery And Shipping Services: While we at ZMS provide high-quality cables, we also provide good delivery solutions. While ensuring the safe delivery of products, we provide the best packaging and transportation solutions, greatly reducing customers’ transportation costs.
Packaging of ZMS: ZMS cable packaging is provided in the form of wooden reels, corrugated boxes, and coils. The cable ends are sealed with BOPP self-adhesive tape and a non-hygroscopic sealing cap to protect the cable ends from moisture. We can print the required marks on the outside of the barrel with waterproof material according to customer requirements.