ABC Aerial Bundled Cable
ABC cable (overhead bundled conductor) is characterized by excellent electrical performance, high short-circuit resistance, long service life, lightweight, easy installation, operation, and maintenance. It is widely used in most parts of the world. This type of overhead bundled cable differs from overhead bare conductor cables in that it consists of copper or aluminum neutral wires wrapped in insulation and tightly bundled together for low and medium voltage power transmission.
Bare cables are used for medium and high voltage power transmission.
Construction and Specifications
0.6/1kV Low Voltage ABC Cable
Low Voltage Aerial Bundled Cable (ABC), designed for overhead power lines and room entrance wires with rated AC voltages of 1kv and below. It is low cost to install, maintain and operate and offers increased safety and reliability.
Standard:
IEC 61089, BS 7870, DIN 48201, ASTM B399, BS EN50183, NFC33-209
Construction:
Conductor: Copper, Aluminum, Aluminum Alloy
Insulation: PVC, HDPE, XLPE
6.5-35KV Medium Voltage ABC Cable
Medium voltage (MV) overhead bundled cables are widely used for grid rehabilitation in urban, forest, and coastal areas for overhead power transmission. ZMS’s MV cables are designed to build more reliable, efficient, and economical systems.
Standard:
IEC60502, NF C33-209, GB 12527-90 ASTM
Construction:
Conductor Material: Aluminum
Conductor Shape: Circular stranded (RM)
Outer Sheath: HDPE
Aluminum Duplex Service Drop Cable
ZMS Duplex Service Drop Wire is composed primarily of 1350-H19 aluminum, with concentrically stranded phase conductors and PVC or XLPE insulation, and a neutral core made of concentrically stranded AAC, ACSR, or 6201 aluminum alloy. Mainly used for 120V overhead services, street and outdoor lighting, etc.
Standard:
ASTM B230, B231, B232 and B-399, B498, ICEA S-76-474
Construction:
Conductor: Aluminum, Aluminum Alloy
Insulation: PVC, XLPE
Triplex Aluminum Service Drop Cable
For 600-volt or lower-voltage service, 120-volt overhead service may be provided for temporary electrical use at construction sites, as a service drop (pole to service entrance), as an auxiliary cable (pole to pole), or as street lighting.
Conductor
Concentric strand or compressed 1350-H19 Conductor, Concentric strand AAC, ACSR or AAAC alloy neutral messenger.
Insulation:
PVC / XLPE
Standards / Testing Specifications:
B-230 Aluminum Wire,1350-H19 for Electrical Purposes.
B-231 Aluminum Conductors, Concentric-Lay Stranded.
ZMS ABC Aerial Cable Specification & Size
Product Name | Aerial Cable |
Model | JKTRYJ; JK(L)YJ; JK(L)Y; JKLGYJ; JKLGY; JKLYJ/Q; JKLY/Q; JKLGYJ/Q; JKLGY/Q; JKLGYJ / JKV / JKLV / JKLHV / JKY / JKLY / JKLHY / JKYJ / JKIYJ / JKLHYJ / JKTRYJ |
Section ( aluminum / steel ) mm2 | 10-240mm2 10/2-500/65 ( JKLGYJ-10 ) 25-240 25-120 ( JKYJ JKTRYJ ) |
Insulation | cross-linked polyethylene(XLPE) insulated, covered for weather proofing with polyethylene(PVC), high density polyethylene(HDPE) |
Conductor | HD Copper Wire, 1350-H19 Aluminum Wire ,or ACSR conductors, concentrically stranded |
Standard | GB/T12527-2008 GB/T1179-2008 GB/T14049-2008 / IEC 60502 / IEC 60227 |
Structural Parameters
BS 7870
| Number of Cores x Nominal Cross Section | Diameter | Weights | Max. Conductor Resistance | Minimum Breaking Load | Rated Current |
| No.×mm² | mm | Kg/Km | Ω/Km | KN | A |
| 1×16 RM | 8 | 74 | 1.91 | 2.5 | 72 |
| 1×25 RM | 9 | 106 | 1.2 | 4 | 107 |
| 1×35 RM | 10.5 | 138 | 0.868 | 5.5 | 132 |
| 1×50 RM | 11.8 | 182 | 0.641 | 8 | 165 |
| 1×70 RM | 13 | 252 | 0.443 | 10.7 | 205 |
IEC 60502
| Number of Cores x Nominal Cross Section | Total Diameter | Weights | Max. Conductor Resistance | Minimum Breaking Load | Rated Current |
| No.×mm² | mm | Kg/Km | Ω/Km | KN | A |
| 1×16+1×25 RM | 15.3 | 160 | 1.91 | 2.5 | 72 |
| 3×16+1×25 RM | 19 | 290 | 1.2 | 4 | 107 |
| 3×25+1×25 RM | 23.2 | 400 | 0.868 | 5.5 | 132 |
| 3×35+1×25 RM | 25.6 | 500 | 0.641 | 8 | 165 |
| 3×50+1×35 RM | 30 | 680 | 0.443 | 10.7 | 205 |
NFC 33-209
| Number of Cores x Nominal Cross Section | Total Diameter | Weights | Max. Conductor Resistance | Minimum Breaking Load | Rated Current |
| No.×mm² | mm | Kg/Km | Ω/Km | KN | A |
| 2×10 RM | 12.8 | 93 | 3.08 | 1.5 | 38 |
| 4×10 RM | 15.4 | 183 | 3.08 | 1.5 | 38 |
| 2×16 RM | 14.8 | 129 | 1.91 | 2.3 | 72 |
| 2×16 RN + 2×1.5 RE | 14.8 | 176 | 1.910/12.100 | 2.3 | 72 |
| 4×16 RM | 17.8 | 257 | 1.91 | 2.3 | 72 |
The above is only a partial list, other cross-sectional areas or cable specifications are available upon request.
Related ABC Cable Accessories
ZMS is not only experienced in the production of overhead cables but is also a professional ABC cable accessories manufacturer. When installing ABC bundled cables, it is also responsible for providing a wide range of distribution cable terminations for voltages up to 35kV. The integral pre-assembled design, with built-in insulation and strain relief, allows easy installation and accommodates a wide range of cable types and sizes.
Advantages of Aerial Bundled Cable Produced by ZMS
1. High reliability of the power supply system, the choice of aerial cables can significantly reduce a variety of common short-circuit fault failures (especially the common short-circuit fault failures of bare transmission lines). Compared with the airframe bare transmission line, the equipment failure rate is 4-6 times lower.
2. The power supply system safety factor is good, and the choice of ABC conductor so that personal safety and electrocution accident safety accidents are significantly reduced. When the aerial cable is connected to the power supply, when the body or other small animals accidentally touch the surface of the cable line insulation layer, if the cable line is not penetrated, it is not easy to cause adverse effects on people and animals.
3. Our overhead bundle cable is easy to build and overhaul, the overhead cable can be built on all tower poles. It can also be erected along the wall, and in special cases can also be shuttled in the woods, immediately fixed immovably on the main pole with gold tools. ZMS can guide the aerial bundled cable installation.
4. The reasonableness of effectiveness, although the choice of overhead cable is higher than the choice of empty frame bare transmission line the price should be more expensive, but cheaper than the general underground installation of the cable line. Therefore, its comprehensive engineering cost is lower, more economic development, and more effective. ZMS guarantees a more reasonable ABC cable price.
ABC Cable Catalogue
ZMS ABC CABLE PDF
ZMS provides our partners around the world with brochures of our cable products, including aerial cables, submarine cables, control cables and other types of special cables, and more.
If you don’t know how to choose the product you need, or don’t find the cable type and size you need on this page, don’t worry. Contact us and send us your requirements, we can help you choose the right cable. You can provide us with the following information: cable voltage, conductor material, insulation and sheath material, shield type, armor type, etc. or you can provide us with cable installation environment, application requirements, etc. We will serve you wholeheartedly. ZMS cable supplier has a number of quality certifications: ISO 9000, ISO 9001, ISO14000, ISO14001, ISO18000, CE, IEC, BS, NFC, ASTM, DIN, etc.
Service of ZMS Company
Over Productions Service: ZMS has a wide range of cable and conductor products for you to choose from. We will provide caring services and professional project solutions for everyone who needs them.
Quality Certification Services: ZMS cable products are manufactured according to GB, IEC, BS, NFC, ASTM, DIN, and other international standards. Our technical team can customize cable products that meet your requirements according to your needs.
Profession Customer Service: ZMS provides free professional consulting services to provide you with one-stop project solution services and rapid product delivery solutions.
Delivery And Shipping Services: While we at ZMS provide high-quality cables, we also provide good delivery solutions. While ensuring the safe delivery of products, we provide the best packaging and transportation solutions, greatly reducing customers’ transportation costs.
Packaging of ZMS: ZMS cable packaging is provided in the form of wooden reels, corrugated boxes, and coils. The cable ends are sealed with BOPP self-adhesive tape and a non-hygroscopic sealing cap to protect the cable ends from moisture. We can print the required marks on the outside of the barrel with waterproof material according to customer requirements.
More Information
